The Cheapest Window Treatment Bid Is Almost Never the Cheapest Project

2026-11-03 · Mireille Fontaine · Technical Notes

The lowest window treatment bid loses my company money more often than it saves us. After seven years of tracking every invoice, I'm convinced that evaluating custom shades and drapery on unit price is a budgeting error dressed up as fiscal responsibility.

I'm a procurement manager at a 200-person hospitality design-build firm. I've managed our window treatment and FF&E budget—roughly $2.3 million annually—for seven years, negotiated with more than 40 vendors, and logged every order in our cost tracking system. I say that not to impress you but to explain why I keep arriving at the same unpopular conclusion: the cheapest line item on a window covering quote is routinely the most expensive part of the project.

The hidden costs live outside the quote

Setup fees, re-measurement charges, hardware substitutions, freight surcharges—the stuff that never appears on the first page. Check the bleed on that invoice (i.e., the line items buried under "miscellaneous"). In my experience, the cheapest bid is usually the one with the most sub-lines.

Two years ago I chose a cheaper roller shade fabric on a 60-room hotel refresh. Saved about $1,200 on the fabric line. Twelve shades failed UV testing within 14 months—not because the fabric was defective, but because it wasn't rated for west-facing exposure. Replacing them cost $4,800. Net loss: $3,600, plus a phone call to the client that I never want to make again.

That's the pattern. You don't see the cost in the quote. You see it in the reorder.

"Is nylon fabric good?" is the wrong question

People ask me "is nylon fabric good" in almost every category of purchasing I touch—about dresses, about upholstery, about roller shade fabrics. The honest answer is: good for what?

Nylon in a dress is fine. Nylon in a west-facing drapery application is a different conversation, because UV stability, weight, and fire certification are doing the real deciding. I've also seen spec sheets list carbon kevlar hybrid fabric for interior accents where it made no sense at all—impressive material, completely wrong application. The material wasn't the problem. The fit was.

What I mean is that material literacy isn't about memorizing which fabric is "best" in the abstract—it's about matching a specific product's rating to a specific room, exposure, and occupant load, and that is exactly what a cheap bid tends to skip.

The catalog is not a sample

Here's where the hunter douglas catalog becomes a trap. It's a beautiful document. It is not a substitute for a physical sample in your hand, in your light, on your wall.

I knew I should have ordered a physical sample before signing the PO. The catalog looked right, the render looked right, and we were rushing. "What are the odds?" The odds caught up with me: the fabric read two shades darker in the actual room, we ate a $2,700 re-order, and the install slid three weeks. A lesson learned the hard way.

This is also where a good local dealer earns its margin. If you're sourcing Hunter Douglas in Calgary, you'll likely cross paths with dealers like Dynamo Decor Drapery—a local outfit that carries specific lines and can usually get a sample into your hands the same day. The value of that isn't the sticker price. It's the 48-hour turnaround when something goes sideways.

"But budgets are real" — yes, mine too

I get why procurement teams chase the lowest bid—budgets are real, and internal scorecards reward short-term savings. To be fair, sometimes the cheap option is genuinely fine.

But here's the counterintuitive part: the premium brand often ends up cheaper on a total cost of ownership basis, because it produces fewer change orders. Over the past six years I've compared 8 vendors across 3 months using our TCO spreadsheet, and the pattern held: the high-quote bid won on TCO in roughly 60% of our hospitality projects. The quote looked 25–30% higher. The project usually landed 10–15% cheaper once the dust settled.

That difference is real money—especially when you factor in the internal hours spent chasing re-orders, rescheduling installs, and apologizing to clients. Time cost is still cost. Granted, this requires more upfront work on the front end (sampling, spec reviews, dealer conversations), but it pays back fast.

I'm not 100% sure why some dealers consistently hit their install dates while others consistently slip. My best guess is it comes down to internal buffer practices and how much of the job gets subcontracted at the last minute.

What I actually recommend

Nothing exotic. Demand three quotes. Require physical samples on any project over $5,000. Add a "hidden cost checklist" (freight, re-measure fees, hardware add-ons, disposal) to every comparison sheet. And build a TCO column—not just a price column.

Worse than expected, the first time you do it. Better than expected, the first time a re-order doesn't happen.

So no, I'm not going to stop saying it: the cheapest window covering bid is almost never the cheapest project. The math is boring, but the math is the point. Buy on total value, not on the first page of the quote. Your P&L will notice.